Micro-hole Driling Inner Bore Polishing
05
Technology
Micro-hole Driling/Inner Bore Polishing
In addition to micro-hole drilling with ultrasonic machining, Japan Cell can accurately polish the inner wall of holes.
Sample
- Micro-hole Driling
- With regard to microhole machining, the limit of machining depth is generally 10 times the diameter, but Japan Cell has a capability for makinf φ500 μm x 20 mm depth.
・φ100μm×4mm depth
・φ0.3mm×200 holes
・φ500μm×20mm depth
- Inner Bore Polishing
- Japan Cell has a capability for creating a cylindrical flow path by polishing the inner bore.
・φ500μm×20mm depth
・φ250μm